Amina Company Logo

iQ Developer Series


Entry-level invisible loudspeaker,

designed for MDU and commercial applications.

Entry-level plaster-over loudspeaker

 

Designed for budget-sensitive applications such as commercial and MDU projects, the iQ Developer Series incorporates the same VPT technology as the Mobius Series loudspeakers, but in a smaller form factor.

 

Designed to be used with either a full wet plaster skim (2mm) or with a covering such as wood veneer or high pressure laminate (Amina veneer adhesive available), iQ Series loudspeakers offer a low-cost yet flexible invisible sound solution.


iQ3

Inside iQ3

Using the same OptiDrive and VPT technology found in Mobius Series loudspeakers, the iQ3 provides a medium powered solution for invisible background music solutions.

The iQ3 Soundboard

With the same incredibly lightweight, stiff and resonant panel material that is used with the Mobius Series, iQ speakers are designed to work with the covering material to produce great high frequency detail. Given the small size, iQ speakers may be used where other larger panels cannot be fitted.

Amina Tip:
iQ Series speakers are designed to be installed into walls and ceilings where there is to be a wet plaster skim, however it is also possible to install iQ loudspeakers into other materials such as wooden paneling, behind leather, high pressure laminates and other veneers, but please note that you may need to also order additional laminate adhesive for any veneer application. Adhesive will be applied to the loudspeaker at point of manufacture.

Support Products

The Backbox CV300 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission where iQ loudspeakers are installed into stud walls/ceiling.

 

The BackboxSW300 provides a strong mechanical fixing method for solid blockwork and concrete walls/ceilings.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack. Please note that iQ3 speakers require the ‘non-C’ variant of protection unit, for example the APUi30.

APUi information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for iQ Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation. Please note that iQ3 requires the ‘non-C’ variant of protection unit, for example APU-RS16i.

APU-RS information >

SpecificationiQ3
Nominal Impedance8 Ohms
Power Handling30W/60W
Sensitivity84dB 1m/2.83Vrms (APUi30 connected)
Frequency Response112Hz - 20kHz (±6db) mounted in Backbox CV300
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions300mm x 400mm x 40mm (114/5” x 153/4” x 13/5”)
Product Weight1.08Kg (2.38lbs)
Fixing RequirementsBackboxCV300
In Line Protection unitAPUi30
Rack-Mount Protection UnitAPU-RS8i or APU-RS16i
Warranty10 Years Residential (5 Years Commercial)
Datasheet iQ3 Datasheet


iQ2

Inside iQ2

The single-panel dual-channel iQ2 (stereo loudspeaker) can be used in small rooms where there is not sufficient space for a pair of loudspeakers. With dual inputs (left and right), the iQ2 uses the same small form factor as the iQ3.

The iQ2 Soundboard

With the same incredibly lightweight, stiff and resonant panel material that is used with the Mobius Series, iQ2 speakers are designed to work with the covering material to reproduce both channels of stereo content from a single panel, using mechanical rather than electrical summation. Perfect for low level background music in very small rooms.

Amina Tip:
For increased audio performance, Edge5 loudspeakers can provide a great upgrade to iQ Series loudspeakers. The MobiusDual provides a higher performance alternative to the iQ2 dual channel loudspeaker.

Support Products

The Backbox CV300 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission where Mobius loudspeakers are installed into stud walls/ceiling.

 

The BackboxSW300 provides a strong mechanical fixing method for solid blockwork and concrete walls/ceilings.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack. iQ2 requires use of two units of APUi10 single channel protection unit (total two channels per loudspeaker).

APUi information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for iQ Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation. Please note that iQ2 requires two channels of the ‘non-C’ variant of protection unit per loudspeaker, for example two channels from an APU-RS16i.

APU-RS information >

SpecificationiQ2
Nominal Impedance2 x 8 Ohms
Power Handling2 x 15W/30W
Sensitivity86dB 1m/2.83Vrms (2 x APUi10 connected)
Frequency Response112Hz - 20kHz (±6db) mounted in Backbox CV300
Electrical Connection2 x blue butt-splice crimp terminals (14-16 AWG)
Dimensions300mm x 400mm x 40mm (114/5” x 153/4” x 13/5”)
Product Weight0.92Kg (2.03lbs)
Fixing RequirementsBackboxCV300 or SW300
In Line Protection unit2 x APUi10
Rack-Mount Protection UnitAPU-RS8i or APU-RS16i
Warranty10 Years Residential (5 Year Commercial)
Datasheet iQ2 Datasheet