Amina Company Logo

Mobius Series


Versatile high-fidelity invisible loudspeaker,

for design flexibility and incredible high frequency dispersion.

Highly flexible design integration

 

The Mobius Series provides the greatest flexibility for interior design integration and installation of any invisible loudspeaker. Delivering incredible high frequency performance across the entire listening position, allowing for perfect reproduction with all the detail and clarity, no matter where in the space you are listening from.

 

Engineered to work behind a range of covering materials such as wet plaster skim (2mm), wood, leather or high pressure laminate, Mobius Loudspeakers offer the most flexible invisible audio solution available.


Mobius7

Inside Mobius7

The Mobius7 incorporates OptiDamping, OptiDrive and Reduced-Resonance Exciter technology. This gives smooth high frequency extension, high power handling and improved low frequency performance.

The Mobius Soundboard

With an incredibly lightweight, stiff and resonant panel material, Mobius7 speakers are designed to work with the covering material to produce incredible high frequency detail and extension. When paired with a discreet subwoofer, Mobius7 speakers offer the highest performance characteristics of any invisible loudspeaker.

Amina Tip:
Due to the vast range of installation options available for Mobius speakers, it is important to check fitting requirements prior to ordering. For many laminate installations, pre-applied adhesive may be required, available on request.

Support Products

The Backbox CV345 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission where Mobius loudspeakers are installed into stud walls/ceiling.

 

The BackboxSW345 provides a strong mechanical fixing method for solid blockwork and concrete walls/ceilings.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack. Please note that Mobius7 speakers require the ‘C’ variant single channel protection unit APUi70C.

APUiC information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for Edge Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation. Please note that Mobius7 requires the ‘C’ variant of protection unit, for example APU-RS16iC.

APU-RSiC information >

SpecificationMobius7
Nominal Impedance4 Ohms
Power Handling75W/150W
Sensitivity87dB 1m/2.83Vrms (APUi70C connected)
Frequency Response55Hz - 30kHz (±6db) mounted in Backbox CV345
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions345mm x 450mm x 33mm (135/8” x 173/4” x 15/16”)
Product Weight1.78Kg (3lbs 15oz)
Fixing RequirementsBackboxCV345
In-line Protection unitAPUi70C
Rack-Mount Protection UnitAPU-RS8iC or APU-RS16iC
Warranty10 Years Residential (5 Years Commercial)
Datasheet Mobius7 Datasheet


Mobius5

Inside Mobius5

The Mobius5 incorporates OptiDamping, OptiDrive and Reduced-Resonance Exciter technology to give the smooth high frequency extension and low frequency performance, with medium power-handling capabilities.

The Mobius Soundboard

With an incredibly lightweight, stiff and resonant panel material, Mobius5 speakers are designed to work with the covering material to produce incredible high frequency detail and extension. When paired with a discreet subwoofer, Mobius5 speakers offer a full bandwidth high-fidelity audio system.

Amina Tip:
Although Mobius loudspeakers provide low frequency performance suitable for background music, for a full-range invisible sound solution, consider specifying an Amina discreet subwoofer for smooth and powerful low frequency extension.

Support Products

The Backbox CV345 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission where Mobius loudspeakers are installed into stud walls/ceiling.

 

The BackboxSW345 provides a strong mechanical fixing method for solid blockwork and concrete walls/ceilings.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack. Mobius5 requires use of APUi50 single channel protection unit.

APUi information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for Edge Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation.

APU-RSi information >

SpecificationMobius5
Nominal Impedance4 Ohms
Power Handling50W/100W
Sensitivity86dB 1m/2.83Vrms (APUi50 connected)
Frequency Response65Hz - 20kHz (±6db) mounted in Backbox CV345
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions345mm x 450mm x 33mm (135/8” x 173/4” x 15/16”)
Product Weight1.32Kg (2.91lbs)
Fixing RequirementsBackboxCV345
In-line Protection unitAPUi50
Rack-Mount Protection UnitAPU-RS8i or APU-RS16i
Warranty10 Years Residential (5 Year Commercial)
Datasheet Mobius5 Datasheet


Finish Options

Design Flexibility

Engineered to work with the covering material, Mobius loudspeakers can be installed into a number of different materials or with a variety of finish options.

 

Whether installed behind wood, leather, natural stone veneer or other high quality laminates or into a solid blockwork, a wet plaster skim or even a specialist finish such as acoustic or polished plaster, Mobius loudspeakers provide ultimate installation flexibility.

 

Explore some of the many design available options below.

Wood Material

Wood

Whether the design calls for natural wooden panelling or manufactured board, Amina Mobius speakers can easily be installed into wooden structures.

The speaker should be covered with 2-3mm of wood, meaning that sheet stock should be machined down to this thickness of material. For veneer applications, it may be more suitable to construct a ‘frame’ using the mounting board, with the speaker applied directly to the rear of the veneer.

Mobius loudspeakers may be ordered with adhesive pre-applied, allowing them to be stuck directly to the wood. Loudspeakers should always be braced to the rear, giving additional mechanical reinforcement.

For more information on wood installation, please consult the wood installation guide.

 

Example applications

Built into furniture, historic wooden panelling, conference room table, media wall

Leather Material

Leather

Whether an entire wall is to be finished with leather-wrapped panels, or a small leather accent feature is to be used, Amina Mobius loudspeakers can be installed behind both natural and synthetic leather.

Thin and lightweight leathers should be laminated onto a wooden board using a suitable contact adhesive. The wooden board should be machined to a thickness of 1-2mm in the location of the loudspeaker itself, providing adequate support for the leather.

Thick or heavier leathers may also need to be mounted to a board, however may have the loudspeaker adhered directly to the rear of the leather.

Mobius loudspeakers may be ordered with adhesive pre-applied, allowing them to be stuck directly to the wooden paneling or leather itself. Loudspeakers should always be braced to the rear, giving additional mechanical reinforcement.

Example applications

Leather-wrapped headboard, leather-wrapped paneling, ceiling panels

Plaster Material

Wet plaster skim

Where a full wet skim is required to cover a loudspeaker, Mobius can be installed and finished with a 2mm covering of plaster.

With options for either cavity (wall and ceiling) or solid blockwork installation, Mobius loudspeakers have been voiced for a 2mm covering of standard multi-finish plaster, however they can work with a range of alternative or specialist plaster finishes.

Finishes such as polished plaster, acoustic plaster, joint compound, plaster of Paris, glass reinforced plaster (GRP) and other traditional plaster finishes (lath and plaster, lime plaster, waterproof sculpted plaster etc) can also be used. Plastered surfaces may be finished with paint and wallpaper.
Please note that some plaster finishes may require an adjusted installation method. Please contact your distributor for more information if required.

Example applications

Cavity and solid walls/ceilings, painted, wallpaper and other decorative finishes including gold leaf.

Stone Material

Stone Veneer

Whether a natural or synthetic stone veneer is to be used, Mobius loudspeakers may be adhered directly to the rear of a 1-3mm veneer.

With incredible advancements in stone veneer technology, thin veneers of natural stone such as slate, sandstone, marble or cast materials such as concrete veneers can be applied to backing sheets to allow easy integration into a range of designs.
Some synthetic stone materials such as Corian® may be milled down to the desired thickness in the location of the speaker.

Please contact your distributor for more information on how to integrate Mobius speakers with a stone veneer.

 

Example applications

Full wall covering, feature wall, media board, furniture or design accent.

Fabric Material

Fabric

Whether fabric is being adhered directly to a plastered wall or ceiling, being wrapped onto paneling or being stretched onto a frame, Mobius loudspeakers can be easily integrated, allowing for uninterrupted design with a tactile finish.

Acoustically transparent materials can be used in-front of a loudspeaker, but will not require direct adhesion. Non-transparent materials may require direct adhesion to the loudspeaker. Depending on the fabric properties and construction design, Mobius loudspeakers are commonly installed into wooden paneling and are then wrapped in fabric. For more information on fabric installation, please contact your Amina distributor.

 

 

Example applications

Fabric wrapped media walls, headboards, fabric wall panels, stretched fabric ceilings, projector screens

Note:
Amina loudspeakers are not supplied with covering materials, they are designed to work with the existing finishes and construction materials used within the property. For more information, contact your local distributor.